35A 600V Silicon Bridge Rectifier Wire Lead
General all-round bridge rectifier that can be used in most arcade games - rated at 35 Amps and 600VDC. Has wire leads for mounting on a printed circuit board or bent in loops for wires to be soldered to.
Can replace most Selenium Rectifiers, but bear in mind that Silicon Rectifiers are more efficient that Selenium so expect the output voltage to be higher. Selenium rectifiers typically had a voltage drop of 20% of the AC input, whereas Silicon only drops about 1.4VDC total.
This rectifier is approximately 3 x 3 x 2 cm.
Reference:
- 62-1065 - Chicago Coin - Twin Rifle
35A 600V Silicon Bridge Rectifier Wire Lead
- Brand: Semiconductors
- Model or Part Number: GBPC3506W
- Availability: In Stock
-
$8.95 USD
Related Products
Heatsink for 35A Bridge Rectifier
A good heat sink for these bridge rectifiers that run too hot to stay reliable and are most excellen..
$3.95 USD
35A 800V Silicon Bridge Rectifier - Lugs
General all-round bridge rectifier that can be used in most arcade and pinball games - rated at 35 A..
$7.95 USD
4A 100PIV Silicon Bridge Rectifier - Leads
General all-round bridge rectifier that can be used in most arcade games - rated at 4 Amps and 100 P..
$2.95 USD
TVS diode - 5V (6.4V Min)
Transient Voltage Suppression Diode.Suitable for protecting most TTL logic boards - slightly higher ..
$0.75 USD
1n270 Germanium Diode for Gottlieb pinball games etc.
Used in most Gottlieb System 1/80/80A and 80B games for switches and on various logic boards. Rated ..
$1.95 USD







