P.C.B. COMPL. BUBBLE TUBES for the Earlier OMT

Fuse circuit board for the first OMT with bubble tubes, mounts on inside of main door below midrange speakers...

Different than the later 59920 so check the photo to be sure you get the correct one!

Note that this PCB uses 1 x 3.0A T3 style fuses in North America (120VAC)

(Note that this PCB uses 1 x 3.15A T3 elsewhere for higher line voltages than 120VAC.)

Qty

Fuse circuit board for OMT bubble tubes, mounts on inside of main door below midrange speakers...Dif..

$36.95 USD

Standard OMT fuse (North America), T3, 3.0 A, 5x20mm, 250V, Slo-Blow for North America. Previous num..

$1.95 USD

Old part number 0015010008 or 00 150 010 008 or 150010008Note this is not the same as 13647/15010010..

$9.95 USD

Right cabinet side (door hinge) mirror tile strip, three needed per side.Slightly shorter than 12861..

$26.95 USD

Clip-in style starter holder. Wires are pushed into holes after being stripped about 1/2 inch...

$1.98 USD

Turntable drive ring for 45 RPM record playing jukeboxes including the OMT-45. 133mm (5.25") diamete..

$9.95 USD

$59.95 USD