Rebuild Kit for Series 1 Regulator boards

We now offer a kit to rebuild the regulator/power supply for Bally Home Series 1 (first generation) Pinballs

• 606-1000 FIREBALL
• 614-1000 EVIL KNIEVAL
• 614-3000 FIREBALL II

These include:

• All capacitors
• Replacement mini-PCB for the overheated 18VDC Zener Diode and resistor
• Replacement header pin sets as these are usually in poor condition
• Replacement plugs and Trifurcon pins for the game wiring to the Regulator/Power Supply board

Please do the following checks/tests checks prior to purchase:

• You need a temperature controlled soldering iron to avoid damaging your board
• Some Solder Wick or other solder removing tool to clean up the board prior to parts installation
• Good quality solder 60/40 or 63/37 lead/tin mixture

Use your voltmeter to check that you see the voltages at the power pins for the MPU board before plugging in the MPU board after repairs - to be sure you didn't make a mistake.

!!No warranty against failure - you must verify all voltages prior to installing!!