XPin Williams: Riverboat Gambler

Product Overview

New XPin™ LED (Light Emitting Diodes) displays for pinball machines are the best performing, most feature-packed and economical replacement systems for obsolete glass plasma digital displays. Demonstration of original PLASMA display, demonstration of XPin LED replacement display.

Supported Games

WMS:  Riverboat Gambler

Features

   · Plug & Play installation for installation by novices and experts alike
   · Adjustable Brightness to match varying game-room conditions
   · Lowest power consumption of any display on the market - No overloaded
     game power supplies
   · Aesthetically sleek Black Matte finish
   · Foam Light-Blocks prevent general illumination leakage glare
   · Professionally assembled in USA for top quality
   · 2 Year Manufactures Warranty against all manufacturing defects
   · Optional Transparent Grey Vinyl Film for Light-Blocks

Installation

   · Installation Time:  About 20 minutes

   · Tools Required: 1/4” Nut-driver, Phillips screwdriver

   1. Unplug the AC power from your pinball machine. Remove game backglass.
       Unplug all display board connecting cables and remove the original display
       driver board.
   2. Replace the display with your new XPin™ XP-WMS12232 display.
       NOTE: It has been seen that the listed games have as many as 5 different
       mounting methods to the speaker panels of the Williams.  If your mounting
       hardware is not suitable or missing, please check out the Accessories page
       to see if we have a kit available.
   3. Connect all cables leading from the head to the display board.
   4. Replace the Jackpot display and ribbon cable with those provided.
   5. It is recommended that you remove the High Voltage fuse from your
       power supply, as it is no longer needed.
   6. If not already in place, attach the Foam Light-Blocks on their respective
       LED displays.
   7. The optional grey vinyl is easily installed at this time.
   8. Connect the cables.
   9. Double-check all connections, plug in the machine, and turn the game on.
       The LEDs will light up. Pressing the TEST pushbutton on the XP-WMS12232
       board will illuminate all segments of all displays.  This indicates that all
       boards and cables in the XPin™ System are operating correctly. Use the
       thumbwheel BRIGHTNESS control on the board to set your preferred
       illumination level.