XPin Williams System 11/DE - Orange LED Display

Product Overview

New XPin™ LED (Light Emitting Diodes) displays for pinball machines are the best performing, most feature-packed and economical replacement systems for obsolete glass plasma digital displays.

Supported Games

WMS:  Grand Lizard, High Speed, Road Kings, Pin•Bot/Pinbot/Pin-Bot

Data East: Laser War/Lazer War

Demo Video (youtube)

Features

• Plug & Play installation for installation by novices and experts alike Adjustable Brightness to match varying game-room conditions
• Lowest power consumption of any display on the market - No overloaded game power supplies
• Aesthetically sleek Black Matte finish
• Foam Light-Blocks prevent general illumination leakage glare
• Professionally assembled in USA for top quality
• 2 Year Manufactures Warranty against all manufacturing defects
• Optional Transparent Grey Vinyl Film for Light-Blocks

Installation

•    Installation Time:  About 20 minutes
•    Tools Required: 1/4” Nut-driver, Phillips screwdriver

1. Unplug the AC power from your pinball machine. Remove game backglass. Unplug all display board connecting cables and remove the 5 original glass display circuit boards.
2. Open the backbox, and remove the original display driver board, listed as a D-10877.
3. Replace the D-10877 with your new XPin™ XP-WMS10877 driver board.
4. The original cables for Players 1, 2, and the Ball/Credit display will still be used, so attach them as indicated.
5. Two (2) new 26 pin cables have been provided for Players 3 and 4. Attach as indicated.
6. Make sure to feed all cables through their appropriate holes in the display panel.
7. Connect all other cables leading from the head to the display driver board.
8. It is recommended that you remove the High Voltage fuse from your power supply, as it is no longer needed. 
9. Close the backbox door and proceed to mount the individual XPin™ score and Ball/Credit displays onto the backbox door.  If not already in place, attach the Foam Light-Blocks on their respective LED displays.
10. The optional grey vinyl is easily installed at this time.
11. Connect the cables.
12. Double-check all connections, plug in the machine, and turn the game on. The LEDs will light up. Pressing the TEST pushbutton on the XP-WMS10877 board will illuminate all segments of all displays.  This indicates that all boards and cables in the XPin™ System are operating correctly. Use the thumbwheel BRIGHTNESS control on the board to set your preferred illumination level.
13. PLAY PINBALL! You’ll enjoy your XPin™ displays for years to come!