Gottlieb
New Old Stock Parts from the Time Travel Warehouse as well as new parts from current suppliers
Armature
(Part #18643)
Armature for Single Target Drop CoilGoes with:18644 Retaining Spring..
$6.77 CAD
Coil Sleeve 1/2 inch diameter-various lengths
(Part #CoilSleeveHalfinch)
Standard size 1/2 Dia. Coil sleeves for PinballsCoil Sleeve Lengths:1 1/4 in1 5/7 in1&nb..
$2.05 CAD
Coil Sleeve 5/8 inch Diameter -various lengths
(Part #CoilSleeve5-8inch)
Coil Sleeve 5/8" Diameter2"2 5/16"..
$3.42 CAD
Flanged Coil Sleeve 1/2" diameter
(Part #FlangedCoilSleeve1-2)
Flanged Coil Sleeve Used In Chimes, Knocker and other Coils.Sizes Available BelowTotal Length &..
$2.05 CAD
Retaining Spring
(Part #18644)
Retaining Spring for Armature for Single Target Drop CoilGoes with:18643 - Armature..
$2.67 CAD
SC-01A Speech Synthesizer Chip
(Part #SC01A)
Tested, used, Votrax "VOICE CHIP" integrated circuit. The white mark is how we designate tested chip..
$273.40 CAD
Shooter Sleeve
(Part #ShooterSleeve)
7/16 in x 2 in (Gottleib)Part Number #26313 7/16 in x 2 1/4 in (Bally, Etc) Part Number #03-7357 Se..
$2.05 CAD
1 inch Faceted Plastic Post
(Part #C-11561)
Opaque white, Fits #6 screws.From around 1960 on....
$1.30 CAD
Gottlieb System 1 MPU - rebuilt
(Part #Got-System1-MPU-rebuilt)
We've rebuilt some System 1 MPUs! These are the original factory boards and predate Ni-Wumpf.These a..
$239.23 CAD
Play FLIPPER SKILL GAMES Bumper Sticker
(Part #Gott-BumperSticker)
Gottlieb headboard banner artwork from the 60s - done in either Red or Green, you choose!Full text r..
$13.67 CAD
Pop Bumper Switch Assy
(Part #B-18089)
Originally used in System 1 DC pop bumper games,Tungsten contacts for the spoon switch: A-17828 (cup..
$20.44 CAD
Pop Bumper Switch Assy
(Part #B-18090)
Originally used in System 1 DC pop bumper games,Tungsten contacts for the spoon switch: A-17828 (cup..
$20.44 CAD
System1_MasterDriver
(Part #PB00-D110)
New Old Stock Gottlieb System 1 original Lamp/Solenoid driver board with factory added protection di..
$170.88 CAD
Fibre washer for chime assembly
(Part #104316)
Fiber washer used in pairs for Gottlieb Chime Units - above and below the rubber grommet . 4 washers..
$0.62 CAD
Grommet for supporting Chime Bar
(Part #A-2752)
Chime grommet used in aluminum chime bars. Two grommets per chime bar...
$1.30 CAD
Lock Nut 6-32
(Part #6-32_LockNut)
Nylon lock nut.Used in Gottlieb Chime Assemblies (Elastic Stop Nut), Stern for securing playfield pl..
$0.68 CAD
Chime Plunger
(Part #A-7652_use_A-1487)
Knocker and bells too - nylon tipped hollow plungerObsolete - replaced by A-1487..
$13.60 CAD
Gottlieb Parts Catalogue 1978 Volume P
(Part #Gott-Parts-78)
Factory original parts catalogue Volume P - contains listings of almost all the parts used on pinbal..
$88.86 CAD