Allied Leisure Industries - ALI
Parts for Allied Leisure pinball and Shakerball games including: Take Five, Eros, Dyn-O-Myte, Roy Clark/Entertainer, Getaway, and more...
PINBALL PARTS CATALOG (click here)
Actuator Cam - 3D
(Part #264-5-25)
3D reproduction. As strong or stronger than the original. This is a darkish grey colour instead of t..
$15.00 USD
ALI Pinball MPU Rebuilt with Sub-Board Upgrade
(Part #ALI-MPU-RvH-and-Sub-Board)
We have rebuilt original ALI (ALLIED LEISURE INDUSTRIES) Master Processing Unit (MPU) boards, and ar..
$395.00 USD
ALI Pinball MPU Sub-Board Upgrade
(Part #ALI-MPU-Sub-Board)
New Revision 2 boards are now in stock.Finally! A replacement for the three blasted custom Rockwell ..
$149.95 USD
Drop Target Paddle - 3D
(Part #264-5-18)
The New Old Stock nylon drop targets are all gone, however we have 3D printed drop targets that are ..
$14.95 USD
Pinball manual and schematics
(Part #ALI_System2_Manual)
This is our compiled service manual and large format schematics for Allied Leisure Industry regular ..
$25.00 USD
Small 7-Segment Display for Cocktail Pinball Displays
(Part #50050005)
This is the original IEE1787R red LED display used in these display modules for the cocktail table v..
$29.95 USD
Small Alternate 7-Segment Display for Cocktail Pinball Displays
(Part #50050005-alt)
This is the less expensive substitute LED display that works in ALI pinballs that may have bad segme..
$2.95 USD
Box of #51 bulbs
(Part #Bulbs_51)
Box of ten #51 bayonet base lights,Great for POP BUMPERS or areas on games you don't want to change ..
$4.95 USD
Schematics and manuals for early multi-board pinballs
(Part #System_Pinball_Manual)
The first generation games all used the same service information. This is our compilation that is qu..
$25.00 USD
Grommet for supporting Chime Bar
(Part #235-8-119)
Chime grommet used in ALI aluminum chime bars. Two grommets per chime bar.Similar in size to Gottlie..
$0.25 USD
Ball Shooter with Logo
(Part #264-1-19)
Allied Leisure Pinball Shooter rod (with logo) for regular games - total length is 8-1/2 inches. Coc..
$29.95 USD
Ball Shooter with Logo for cocktail
(Part #307-2-1)
Allied Leisure Pinball Shooter rod (with logo) cocktail ball shooter length is 6 inches as shown.Las..
$49.95 USD
Flipper Assembly LH or RH
(Part #264-1-7)
This is for one (1) entire flipper assembly set up for ALI cocktail pinball games - comes with the f..
$125.00 USD
