Williams
Coil by Williams
(Part #AE-23-800_Williams)
NOS Williams Factory coil, not a reproduction! The real label for that special restoration.......
$29.95 USD
Coil with diode
(Part #AE-23-800-03_remake)
There are a number of variations of the basic AE-23-800 AE-23-800 - no diode can be replaced by (aft..
$19.95 USD
Eject Hole Shield
(Part #03-9101-9)
Williams Eject Hole/ Shield -Plastic, transparent Red, 3/16 inch mounting holes.Replaces:545-5060-02..
$8.95 USD
Flipper EOS Switch NO contacts
(Part #SW-1A-194)
End Of Stroke (E.O.S) switch, gold contacts, normally open - close when flipper fully activated.Corr..
$12.74 USD
Flipper Relay
(Part #5580-08994-1)
4PDT, 5A 6VDC PCB Mount Relay. Used for flipper control on early solid state Williams games such as ..
$29.95 USD
Hyperball Cannon Power Switching Board Assembly Upgrade
(Part #C-8938)
Replacement/upgrade higher heat tolerant power driver boards.There was a factory upgrade, using the ..
$89.95 USD
Mini-Microswitch long wire arm
(Part #5647-12073-04_09)
Mini-Micro-Switch by Cherry, DA3 style.1N4004 diode 5070-09054-00 not included. Order that bel..
$9.95 USD
Williams System 9, 11, 11A, 11B and 11C MPU Board
(Part #RD-MPU9211)
Rottendog's Williams System 9, 11, 11A, 11B and 11C MPU Board is completely redesigned and replace..
$540.00 USD
Lower Right Wire Ramp
(Part #12-6897)
New Old Stock - Inlane wire form guide for Williams Rollergames/Roller GamesWe only have the one.....
$60.00 USD
Millionaire Wire Ramp
(Part #D-12-6716)
This is a New Old Stock (NOS) wire ramp for Williams Millionaire pinball - goes on the upper playfie..
$99.95 USD
Link Armature
(Part #03-8085)
Plastic link used for kickers and other actions. Might be under 03-8083..
$1.95 USD
Cap Screw 10-32 x 3/8 In
(Part #4010-01066-01)
Cap Screw 10-32 x 3/8 inch Hex Allen Head Socket, (threaded shaft is shorter than photo)Used for:fli..
$0.95 USD
Coin Tube
(Part #3A-7159)
This feeds the coin on the coin door into the metal chute. Often broken!..
$3.95 USD
Complete Batter Unit for Action Baseball
(Part #C-5161-400)
Used in Action Baseball - New Old Stock! Uses coil H23-870.Should be adaptable to Line Drive and oth..
$449.95 USD
Drive Crank
(Part #3A-6085)
Nylon Drive Crank used in Ten Step Drum Units that have PAPER Reel..
$19.95 USD
Early Solid State Pop Bumper Switch
(Part #A-7459-4)
Switch stack for SS version of DC Pop/Jet Bumpers that have a pair of brass contacts for transistor ..
$34.95 USD
Flipper Coil Stop - Reinforced
(Part #A-10280)
Later style used from on 1993 to 1999 Williams as well as Bally Games, reinforced for longer life!No..
$9.95 USD
Mini-Microswitch - Bare Switch
(Part #5647-12073-08)
Mini-Micro-Switch by Cherry, DB3 style. Short solder legs!1N4004 diode 5070-09054-00 not inclu..
$7.95 USD
Mini-Microswitch long arm
(Part #5647-12073-07)
Mini-Micro-Switch by Cherry, DA3 style.1N4004 diode 5070-09054-00 not included. Order that bel..
$9.95 USD