35A 600V Silicon Bridge Rectifier - Lugs
General all-round bridge rectifier that can be used in most arcade and pinball games - rated at 35 Amps and 600VDC. Has quick-connect lugs that can also be soldered to, or mounted on a PCB. Can replace any 35A bridge rectifier up to 800V rating
Can replace most Selenium Rectifiers, but bear in mind that Silicon Rectifiers are more efficient that Selenium so expect the output voltage to be higher. Selenium rectifiers typically had a voltage drop of 20% of the AC input, whereas Silicon only drops about 1.4VDC total.
This rectifier is 1 inch square x 3/4 inch high - 2.54 x 2.54 x 2 cm.
Reference:
- 5608-1 - Chicago Coin
- 62-1065 - Chicago Coin - Twin Rifle
- Data East - 112-5000-00
- Williams - 5100-09690-00, 5A-8753, 5A-9050
35A 600V Silicon Bridge Rectifier - Lugs
- Brand: Semiconductors
- Model or Part Number: GBPC3508
- Availability: In Stock
-
$7.95 USD
Related Products
Heatsink for 35A Bridge Rectifier
A good heat sink for these bridge rectifiers that run too hot to stay reliable and are most excellen..
$3.95 USD
TVS diode - 12V (14.1V Min)
Transient Voltage Suppression Diode.Suitable for protecting most 12V audio boards. Specs:Voltage - R..
$0.75 USD
1N5406 diode
3A 600PIV (Peak Inverse Voltage) general purpose diode in a DO-201 case. Handy for the toolkit! No..
$0.85 USD
1N4007 diode
1A 1000PIV (Peak Inverse Voltage) general purpose diode in a DO-41 case. Handy for the toolkit! No..
$0.50 USD
4A 100PIV Silicon Bridge Rectifier - Leads
General all-round bridge rectifier that can be used in most arcade games - rated at 4 Amps and 100 P..
$2.95 USD







