4A 100PIV Silicon Bridge Rectifier - Leads
General all-round bridge rectifier that can be used in most arcade games - rated at 4 Amps and 100 PIV (Peak Inverse Voltage). Has wire leads that can be soldered directly to a printed circuit board (PCB) or bent so you can solder wires to them.
Can replace most Selenium Rectifiers, but bear in mind that Silicon Rectifiers are more efficient that Selenium so expect the output voltage to be higher. Selenium rectifiers typically had a voltage drop of 20% of the AC input, whereas Silicon Bridge Rectifiers only drop about 1.4VDC total.
This rectifier is approximately 2 x 2 x 1 cm.
Reference:
- 62-1065 - Chicago Coin - Twin Rifle
4A 100PIV Silicon Bridge Rectifier - Leads
- Brand: Semiconductors
- Model or Part Number: MDA970-2
- Availability: In Stock
-
$2.95 USD
Related Products
1N5406 diode
3A 600PIV (Peak Inverse Voltage) general purpose diode in a DO-201 case. Handy for the toolkit! No..
$0.85 USD
Heatsink for 35A Bridge Rectifier
A good heat sink for these bridge rectifiers that run too hot to stay reliable and are most excellen..
$3.95 USD
35A 800V Silicon Bridge Rectifier - Lugs
General all-round bridge rectifier that can be used in most arcade and pinball games - rated at 35 A..
$7.95 USD
1N4007 diode
1A 1000PIV (Peak Inverse Voltage) general purpose diode in a DO-41 case. Handy for the toolkit! No..
$0.50 USD
35A 600V Silicon Bridge Rectifier Wire Lead
General all-round bridge rectifier that can be used in most arcade games - rated at 35 Amps and 600V..
$8.95 USD
10A 400V Bridge Rectifier - Leads - Bally/Stern
Good replacement for Bally or Stern rectifiers used in the 1970s pinball games This is a PC mount ..
$7.95 USD








