ALI Pinball MPU Sub-Board Upgrade

New Revision 2 boards are now in stock.

Finally! A replacement for the three blasted custom Rockwell 6530s used in the computers for many of the ALI/Fascination pinball games!

This is a plug-in replacement for IC-3, IC-5, and IC-6 - all-in-one, plug & play - assuming, that is, that the problem is with one or more of the three 6530s that is.

IC3 - R6530-011 or R0007-11
IC5 - R6530-009 or R0008-11
IC6 - R6530-010 or R0006-11

INSTALLATION INSTRUCTIONS:

1. Remove IC3, IC5, and IC6 (6530s), check the condition of the 3 IC sockets!
   
2. Plug the adapter board with the EPROM end going into the IC3 IC socket - see photo. Don't bend or break the mounting pins!
   
3. Done!

TROUBLESHOOTING:

1. Turn game on, LED on sub-board lights to show that power should be good. If LED is not lighting, then check 5VDC power to game board.
   

Can be used in any of the larger single-board motherboards used in:

• Roy Clark / The Entertainer cocktail and full size
• Getaway
• Hoe Down
  
• Take Five cocktail
• Hearts Spades cocktail
• Flame of Athens cocktail
• Circa 1933 cocktail
  
• Eros One cocktail
• Eros II
• Disco 79 cocktail
• Star Shooter cocktail

1 year warranty, unless you blow it up!