Coin or Token Comparator

Single token or coin acceptor (sometimes referred to as a Slug Rejector) - Drop Inserting. 

• 12VDC operation 150MA @ 12VDC.
• fits most standard 3-1/2" Coin Mechanism frames
• CPU Programmed to be anti-stringing
• Timer Switch - 30ms, 50ms, or 100ms pulse
  
• Coin Drop Speed Detect (anti-stringing)
• Abnormal Movement Detect (anti-stringing)
• Reverse Move Detect (anti-stringing)
• Coin diameter from 18mm to 31mm
  
• Coin thickness from 1.2mm to 3mm
• All coins/tokens suitable
• Compares coin diameter (has reject if too large), thickness, and composition
• Fine tuning adjustment - Variable Resistor
• Meter counting available
• Has Inhibitor output: High is +3 to 5VDC, Low is below 0.8VDC.
• Includes wiring cable and plug
  

Note that the outputs use pull-up resistor array to keep outputs High. If you remove the resistor you can then control more than 12VDC devices such as a 24VDC relay.