Flat face pins 08-50-0106 - 0.156 inch
Molex regular flat face 0.156 inch pins. Used for connections in Molex 0.156" plugs where the pins grip round, flat, or PCB trace face pins - Atari, Bally, Gottlieb, Stern Electronics, and Williams all can use these pins for various plugs.
Note this pin also works with circuit board card edge connections - where the circuit board has a tongue type of connection with a printed circuit contact face.
If you need a crimper check these out...
| Gender | Female |
|---|---|
| Material - Metal | Brass |
| Material - Plating Mating | Tin |
| Material - Plating Termination | Tin |
| Net Weight | 0.280/g |
| Packaging Type | Bag |
| Plating min - Mating | 2.540µm |
| Plating min - Termination | 2.540µm |
| Termination Interface: Style | Crimp or Compression |
| Wire Insulation Diameter | 2.79mm max. |
| Wire Size AWG | 18, 20, 22, 24 |
Flat face pins 08-50-0106 - 0.156 inch
- Brand: Molex
- Product Code: 0008500106
- Availability: In Stock
-
$0.29 USD
Related Products
Crimper, General Purpose - 14 to 24 AWG
Economical "B" Type Crimper For all contacts except 0.062" "B" type insulation crimps in following ..
$44.95 USD
Header 6 PIN
Rectangular Molex connector for Williams and Date East regulator boardsObsolete.....
$8.95 USD
Header 12 PIN
Rectangular Molex connector for Williams and Date East regulator boardsObsolete.....
$9.95 USD
Header 9 PIN
Molex 9 pin header for 0.156 pins with Locking Ramp.(Photo shows a 7-pin connector, this one i..
$3.95 USD