Replacement for Autospeed Capacitor

This is a modern replacement capacitor for the original 4.0 MFD 370VAC Oil Filled Paper Capacitor. This is smaller and easy to mount - you may have to enlarge a hole on the top edge to fit the mounting stud. You then cut off the old clips, and remove about 1/2" of insulation, then insert each wire into the enclosed crimp connectors, the two wires from one original lug into one, and the single wire from the other old capacitor lug into the other.

These capacitors are not polarized so it does not matter which plug goes on which tab.

These are rated at 10,000 hours at 420VAC, should last decades at 120VAC!

Reference:

• 45TASU1 - C751
• 45TASU2 - C2101

In Isle 3C - Seeburg