Ring and Rod Assembly
These are the best quality rod & ring assemblies, the end of the post that joins the ring is widened and it is well pressed on the top.
Total length of the rod is 3 inches from the underside of the ring, length of rod to top of threaded portion is 2-5/8 inches. If this rod is too short then add a spacer washer or two to raise up the ring between the top of the threaded portion of the rod and the yoke it mounts too. Make sure you use the correct washer, it must just fit over the threads...nag us to find you some if needed...Should replace:
- Chicago Coin: 231-1507(A) & 312-504 assy.
- Bally "Flange and Stud Assembly" A1873 and A967-00013-000
- Bally Home Pinball:
- Brunswick:
- Date East/Sega/Stern Pinball: 515-5085-00
- Game Plan:
- Gottlieb: A1316 and A-16634
- Stern Electronics: 2A-141 & 1A-234 assy.,B-695-3 (maybe),
Ring and Rod Assembly
- Brand: Williams
- Model or Part Number: A-4754
- Availability: In Stock
-
$12.95 USD
Related Products
Pop Bumper Rod and Ring - Gottlieb
Basic Rod & Ring assembly. The Wiliiams A-4754 is stronger though. Total length of the rod is ..
$8.50 USD
Bumper Body for Data East Stern Sega
Pop Bumper and bumper body or shell.Cap is usually held on with two small screws.Note this Bumper Bo..
$5.95 USD
Medium Tension Ball Shooter Spring
Green shooter spring - Medium TensionReferred to as A-348 by Gottlieb's part# system.0.19 Gauge spri..
$3.95 USD
