U2 Replacement IC
If you have managed to destroy U2 on your Ni-Wumpf Series 1 MPU then good news! You can fix it if U2 (GAL or PAL) has been damaged...
Typically U2 fails (this is rare!) if you connect solenoid power to Return0 or Return1, or you short the outhole switch to solenoid power, or the Slam switch to solenoid power.
A simple test is to remove the Ni-Wumpf board from the game then with one lead of your ohmmeter connector to ground on the MPU touch the other lead of the ohmmeter (lowest setting or Diode Test) to pins 4, 5, 6 or 8 of U2. All four should show some much the same reading, and not a short to ground!
Related Products
Game Plan MPU-3 Computer
That old Game Plan machine was great.. until battery alkaline corrosion (sometimes called acid by mi..
$199.95 USD
Bally/Stern - Alltek ULTIMATE Lamp/LED Drv
Main Features: Direct replacement (supersedes) for Bally AS-2518-14 (AS2518-14), AS-2518-23 ..
$124.95 USD
Bally - Alltek ULTIMATE Aux Lamp/LED Driver
Main Features: Direct replacement for an AS-2518-52 (not to replace the regular lamp driver - o..
$89.95 USD
XPin Gottlieb System 1 Power Supply Rev G
For Gottlieb® games from the 1980s, this replaces the original power supply with a modern design. Sy..
$79.99 USD
KAHR 5VDC regulator for WPC games
If your WPC game is resetting when you hit both flippers or randomly during regular play and you wan..
$31.95 USD
Bally/Stern - Alltek ULTIMATE Solenoid Driver Board
Main Features: YouTube demonstration video Direct replacement for Bally® AS2518-1..
$164.95 USD