XPin Williams 8000 LED Display - Original

Product Overview

New XPinTM LED (Light Emitting Diodes) displays for pinball machines are the best performing, most feature-packed and economical replacement systems for obsolete glass plasma digital displays.

Supported Games

WMS:  Contact, Disco Fever, Hot Tip, World Cup, Flash, Phoenix, Pokerino,
            Stellar Wars, Blackout, Firepower, Gorgar, Laser Ball, Scorpion,
            Time Warp, Tri Zone, Lucky 7 (Solid State Version)

Features

   · Plug & Play installation for installation by novices and experts alike
   · Adjustable Brightness to match varying game-room conditions
   · Lowest power consumption of any display on the market - No overloaded
     game power supplies
   · Aesthetically sleek Black Matte finish
   · Foam Light-Blocks prevent general illumination leakage glare
   · Professionally assembled in USA for top quality
   · 2 Year Manufactures Warranty against all manufacturing defects
   · Optional Transparent Grey Vinyl Film for Light-Blocks

Installation

   · Installation Time:  About 20 minutes

   · Tools Required: 1/4” Nut-driver, Phillips screwdriver

   1. Unplug the AC power from your pinball machine. Remove game backglass.
       Unplug all display board connecting cables and remove the original display
       driver board and score displays.
   2. Replace the display with your new XPin™ XP-WMS8000 and score displays.
       NOTE: It has been seen that the listed games has had as many as 3
       different mounting methods to the back box door.  If your mounting
       hardware is not suitable or missing, please check out the Accessories page
       to see if we have a kit available.
   3. It is recommended that you remove the High Voltage fuse from your power
       supply, as it is no longer needed.
   4. If not already in place, attach the Foam Light-Blocks on their respective
       LED displays.
   5. The optional grey vinyl is easily installed at this time.
   6. Connect edge connector and provided ribbon cables to the appropriate
       displays. Please make note of proper pin one orientation when connecting
       the ribbon cables.
   7. Double-check all connections, plug in the machine, and turn the game on.
       The LEDs will light up. Pressing the TEST pushbutton on the XP-WMS8000
       board will illuminate all segments of all displays.  This indicates that all
       boards and cables in the XPin™ System are operating correctly. Use the
       thumbwheel BRIGHTNESS control on the board to set your preferred
       illumination level.
   8. PLAY PINBALL! You’ll enjoy your XPin™ displays for years to come!