4.7K ohm/470pf Resistor/Capacitor SIP Network

We've made a nice replacement PCB kit to replace the original SIP Resistor/Capacitor array. The kit part is where you choose the mounting pins - right angle, or straight - and solder the PCB to the mounting pins yourself.

The PCB meets ROHS silver solder standards. You can either use our pins (may not be ROHS compliant due to age) or choose your own. You choose the solder you wish to use and assemble them easily. We simply seat the pins in the solder holes on the PCB, and then fit the tiny PCB on top - white edge goes to Pin #1 - and then solder away!

Original part number (on the original arrays) to be replaced was CRL8623L.

The hole with the Square solder is pin #1, the DOT on the original SIP RC array.