Bushing 1/2 ID x 5/8 OD x 5/8 Long

This sintered bronze bushing is used in the restoration of Wurlitzer SIMPLEX style mechanisms from the 12 play, through the 16, and the 24 record versions. This is for the Main Cam Shaft Assembly where the kidney shaped cam is on one end and the main fiber drive gear is towards the other end.

You need to know how to install bushings in pot metal frames that never had a bushing before - it is easy to wreck the frame, I recommend a machine shop to install and align the bushing (two bushings if the front of the frame is also worn) using a straight 1/2 cold rolled steel rod to check alignment.

Machines this will work in include:

• 412
• 616
• 500
• 750
• 800
• 900
• 1015
• 1100

and others in the same period that use a 1/2 inch metal shaft. Probably work in Seeburg and Rockola pre-war and some post war models too.