Web Analytics Made Easy -
StatCounter
  • Gottlieb System 1 - Rebuilt (A3) Master Driver Board

Gottlieb System 1 - Rebuilt (A3) Master Driver Board

We have a few of these Original Gottlieb reconditioned System 1 Lamp/Solenoid Driver Boards (A3) - in good to very good condition - may have blemishs but they are fully tested for 100% working. We test them on our Gottlieb Factory Test Fixture, so we know they are ready to go. These will work with either the original Gottlieb System 1 MPU or the Ni-Wumpf System system 1MPU.

Part number PB00-D123-001 REV (with diodes)

We have also added our recommended ground wire to reduce the risk of coils frying!

These are good factory originals rebuilt by John's Jukes Ltd. service technicians.

Limited Warranty - the only coverage we offer is 90 days repair or replacement of the logic board from date of shipment. We reserve the right to refuse warranty repair if the board was damaged by external issues. Shipping costs are born by the customer unless we determine the board problem was our fault, in which case we will cover the least expensive postal shipping cost back to us using our original shipping box only (so save the box and packing material!).

If your game has problems it may damage or destroy this board (voiding the warranty) - so make sure your game is ready to receive a Known-To-Be-Good board!

LAMP Driver transistors are not covered because you can destroy them by changing lamps with the power on! ONLY CHANGE DRIVER BOARD CONTROLLED LIGHT BULBS WITH THE POWER OFF!



Gottlieb System 1 - Rebuilt (A3) Master Driver Board

  • Brand: Gottlieb ™
  • Model or Part Number: PB00-D123-001_Rebuilt-Sys1-DriverBd
  • Availability: In Stock
  • $114.95 USD


Related Products

Gottlieb System 1 - Ni-Wumpf MPU Mk-2 - 2025

Gottlieb System 1 - Ni-Wumpf MPU Mk-2 - 2025

The new (latest code as of Sept, 2025) Ni-Wumpf System 1 MPU board MKII is a plug-in replacement for..

$249.95 USD

System1_MasterDriver

System1_MasterDriver

New Old Stock Gottlieb System 1 original Lamp/Solenoid driver board with factory added protection di..

$175.00 USD

Gottlieb System 1 - Ni-Wumpf Driver

Gottlieb System 1 - Ni-Wumpf Driver

Features... The problems associated with the original Gottlieb driver board are numerou..

$114.95 USD

XPin Gottlieb System 1 Power Supply Rev G

XPin Gottlieb System 1 Power Supply Rev G

For Gottlieb® games from the 1980s, this replaces the original power supply with a modern design. Sy..

$79.99 USD

Flat face pins 08-50-0106 - 0.156 inch

Flat face pins 08-50-0106 - 0.156 inch

Molex regular flat face for 0.156 inch (3.97mm) pin spaced pin headers. Used for connections in Mole..

$0.29 USD

Compression Ring

Compression Ring

..

$6.50 USD

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments