XPin Williams 12232 LED Display - Blue

New XPinTM LED (Light Emitting Diodes) displays for pinball machines are the best performing, most feature-packed and economical replacement systems for obsolete glass plasma digital displays.

Supported Games

WMS:  Bad Cats, Black Knight 2000 (BK2K), Diner, Earthshaker, Jokerz,
            Rollergames, Whirlwind

Data East:  Back to the Future, Monday Night Football, Phantom of the Opera,
                    RoboCop, The Simpsons

Features

   · Plug & Play installation for installation by novices and experts alike
   · Adjustable Brightness to match varying game-room conditions
   · Lowest power consumption of any display on the market - No overloaded
     game power supplies
   · Aesthetically sleek Black Matte finish
   · Foam Light-Blocks prevent general illumination leakage glare
   · Professionally assembled in USA for top quality
   · 2 Year Manufactures Warranty against all manufacturing defects
   · Optional Transparent Grey Vinyl Film for Light-Blocks

Installation

   · Installation Time:  About 20 minutes

   · Tools Required: 1/4” Nut-driver, Phillips screwdriver

   1. Unplug the AC power from your pinball machine. Remove game backglass.
       Unplug all display board connecting cables and remove the original display
       driver board.
   2. If the game is manufactured by Data East, make sure to place the jumper
       indicated on the display board.
   3. Replace the display with your new XPin™ XP-WMS12232 display.
       NOTE: It has been seen that the listed games have as many as 5 different
       mounting methods to the speaker panels of the Williams games or the head
       back board of the Data East games.
   4. Connect all cables leading from the head to the display board.
   5. It is recommended that you remove the High Voltage fuse from your power
       supply, as it is no longer needed.
   6. If not already in place, attach the Foam Light-Blocks on their respective
       LED displays.
   7. The optional grey vinyl is easily installed at this time.
   8. Connect the cables.
   9. Double-check all connections, plug in the machine, and turn the game on.
       The LEDs will light up. Pressing the TEST pushbutton on the XP-WMS12232
       board will illuminate all segments of all displays.  This indicates that all
       boards and cables in the XPin™ System are operating correctly. Use the
       thumbwheel BRIGHTNESS control on the board to set your preferred
       illumination level.
 10. PLAY PINBALL! You’ll enjoy your XPin™ displays for years to come!